HD Sharmans Seamsil® 100

Roofsheet Cut Edge Corrosion Treatment

Tritec Building Contractors are approved applicators of HD Sharmans Seamsil® 100 cut edge corrosion treatment, our operatives are fully trained and competent in applying this market leading system, as standard we offer HD Sharmans 15-year product guarantee on all works completed by Tritec.

Following thorough preparations our operatives will apply Seamsil® 100 to completely encapsulate the defective lap joints, preventing further water ingress and providing maximum protection against further deterioration. Cut edge corrosion is a progressive issue and if neglected can develop into a more serious problem, it is always good practice to monitor and maintain your commercial roofs to prevent such issues or to treat them early on. Tritec can provide early detection with our planned maintenance services.

HD Sharmans Seamsil® 100 cut edge corrosion system was designed to provide effective long- life solutions to treat the corrosion that forms at the vulnerable cut edges and overlap joins of metal roof sheets. Water is usually trapped through capillary action and can’t evaporate, it then begins to dissolve the protective zinc layer causing corrosion to begin, lifting the coating away from the steel substrate and compromising integrity of the roof. Seamsil® metal protection systems are designed to provide effective long-life solutions specifically formulated to arrest the adverse effects of rust, chemical corrosion and industrial pollution.


Seamsil 100® Related Video

  • brush-icons.png Via Brush

Key Benefits of our HD Sharmans Seamsil® 100 Service

  • HD Sharmans Semsil® 100 Cut Edge Corrosion System extends the life cycle of commercial roof sheets by at least 15 years*.
  • HD Sharmans Semsil® 100 Cut Edge Corrosion System provides long term protection in elasticity and encapsulation.
  • HD Sharmans Seamsil® 100 Cut Edge Corrosion System can withstand long term exposure to industrial pollution, coastal & marine environments.
  • HD Sharmans Seamsil® 100 Cut Edge Corrosion System is naturally corrosion resistant formulated to arrest the adverse effects of rust.
  • HD Sharmans Seamsil® 100 Cut Edge Corrosion System is naturally water repellent.
  • HD Sharmans Seamsil® 100 Cut Edge Corrosion System is proven, tried and tested system.

Tritec Case Studies

Please see some of the projects that we have completed using HD Sharmans Delcote® GS - Gutter Refurbishment.

edgware bus station

Amazon Distribution Warehouse, Croydon

Full Cut Edge Corrsion Treatment with Giromax Seamsil 100 system, backed with a 10 year guarantee Area 1500 Linear Meters.

Chineham Gate Basingstoke

Kassam Stadium, Oxford

Full Giromax Seamsil 100 Cut Edge Corrosion Treatment.

Chineham Gate Basingstoke

Juniper West, Basildon

A requirement for a full overhaul of the cut edge corrosion and metal box guttering with Giromax Seamsil 100 and HPG Delcote systems respectively.

Crown House Milton Keynes

Refurbishment project including Seamsil cut edge corrosion, Seamsil 300 cutter joint treatment and installation of GRP box profile roof lights.

VW Showroom Scarborough

Tritec were appointed to install the Seamsil 100 cute edge corrosion treatment, including a 10 year guarantee.

Pets at Home Waterlooville

Cut edge corrosion treatment was required. Tritec installed Giromax Seamsil 100 system with a 10 year guarantee.

Imperial Way Croydon

A full Giromax Seamsil 100 cut edge corrosion treatment installed including a 10 year guarantee.

Brantano Lakeside

Giromax specified works to existing roof and gutter substrates. Including architectual Delcote, HPG Delcote and Delglaze.

GE Warehouse Skelmersdale

UK waterproofing solutions appointed us for the installation of Tritec Seamsil 100 cut edge corrosion treatment, including a 10 year guarantee.

Keuhne & Nagel Midpoint Park

Tritec were appointed by Weatherproofing Advisors Ltd to install Giromax Seamsil and HPG delcote gutter treatment.

Old Fields Ind Est Stoke

Paragon Contractors Ltd appointed us for the application of Seamsil treatment and replacement of no.18 vertical wall cladding panels.

guarantee-icons Aftercare & Guarantee’s

Please see below what cover is available on our services with HD Sharmans Seamsil® 100.

  • HD Sharmans 15-Year Product Guarantee.
  • HD Sharmans 25-Year Single Point Warranty.
  • Insurance Backed Guarantee.
  • Performance Bond.
  • Tritec Aftercare Package.
call Now

Seamsil 100 Notes

  • This product has a life expectancy of over 15 years.
  • Insurance backed guarantee’s & performance bonds are obtained via third party brokers and underwriters, these must be requested at tender stage and will be chargeable as an additional premium.
  • HD Sharmans single point guarantee is available on request and will be charged as an additional premium over and above the works package.
  • This service is a supply and install service provided directly by Tritec Building Contractors Ltd, we do not provide product only sales.
  • All services are provided as per our standard terms of business.